UV 3D Printing Resin
Poly-Props UV 3D Printing Resin is an Alcohol wash translucent resin.
Recommendation is for 50-80s bottom layers and 4-6s normal layers on an RGB UV LCD (Photon, Photon S, etc.) and 20-50s bottom layers and 1.5-2.5s normal layers on a monochromatic UV LCD (Photon Mono X, etc.).
We recommend running a resin exposure range finder (RERF) test as different printers have different UV LED strengths and additionally the UV LEDs performance of all printers drops off over time. Layer curing is roughly in line with the products from Anycubic and Elegoo. Not tested on Formlabs.
Available Sizes: 250g, 500g, 1 Kg, 5kg & 25kg