HexArt is the flexible aerosol addition to the HexPaints range, developed by Poly-Props Ltd.

The metallic range gives a selection of metal finishes, from high sheen gold to dull gun metal. Ideal if you want a flexible, tough and smooth finish paint.

INSTRUCTIONS

1- Be sure that surfaces are primed! HexArt works at it's best when a surface has a flexible primer, such as SEAL Prime.
2- Shake can for at least one minute before use.
3- Clear nozzle by spraying can upside down, this will reduce nozzle clogging.
4- Spray in VERY light cross coats at a distance of 20cm from surface. Leave to dry for 10-15 minutes between coats.
5- For best pigmentation performance, shake can between coats.
6- When masking, remove the tape before product is fully dry.

Please note: Using HexArt metallic in cold conditions may make surface coating react to the temperature. For best finish, keep can warm and use in warm conditions.